3D-CAD TECNICO

20mm2 extruder axis, the direction of rotation of the multistage tandem HAITORUKU specifications and formula (standard equipment), compare gear box

(Image: pink front HAITORUKUTAIPU)

Department Thrust, the standard method SURASUTOBEARINGU multistage tandem type of aircraft compared with body size gear case

1 / 2 below.

Refer to Diagram multistage can be seen in the output shaft gear attached to SURASUTOBEARIN alternately.

Is, of course, between the two axes of the shaft so limited in size and gear shaft bearings in each is limited.

Small two-axis rotational direction of extrusion HAITORUKU the low-speed gear box of high turnover and a strong torque

TASHIMASU.

Since there are no gear shaft, helical gears SUPAGIA items from the standard to move to the back of the device to change

Last inner diameter of the structure and the outside diameter of the tapered shape of the taper and repulsion using食込MI

Structure.

Tip of the screw into the inside of the coupling strength and lose FURE.

If a barrel mounted on the console, the lower tip of φ20mm × 3 to place a line installed in the shaft positioning

. Standard equipment of the barrel between the spacer and gearbox and mounted in the positioning, but

HAITORUKU specifications of the space is about 50mm.

100 (W) × 270 (D) × 150 (H) Overall length from the tip of the input shaft attached to the shaft tip.

One Response to "axis of the direction of two small HAITORUKU gearbox"

1. nishihori Says:
   November 6th, 2008 at 1:59 PM

   Hello, nishihori Call.

   Send e-mail contact is an error, so from here, too.

   I would like to e-mail contact as soon as possible.

   Because we worry that the technology group, please contact us look forward.

Comment on this article

☆ Please!, To comment on this article, not a name or a nickname, such as company name, please.