October 21st
Mirror screw machining
The process of cutting and processing from the mirror, without distortion, and Darre Edge is available in a simple jig.
Material: SACM645 (nitride steel) nitriding process: HRc 60 or more nitride layers: 0.3mm or more
Turn this way, the mold and die T CHUBUDAI and can be applied to a complex shape.
October 24, with mail Us
Thank you for reference materials and images. Mi-do by hand is a kid, so I think you know that even if the processing引目is vertical to the cutting surface and polished along the direction of the next Call polish. Repeat the process with vertical and horizontal extent of # 400 will finish this work is to shorten the time in question is what to do.
MC processing of the images for reference, so instead of end mills crush the surface will have a good process. Since cutting costs from the impact of a machine that does not bother with the NC program that can take it.
The problem is the pin-tool plant at the tip of CADEAU R (0.5 to a minimum R) is dedicated to impossible because the oil is needed.
E-mail contact, please contact the case.
E-mail contact on November 1 of the cases (machining center remodeling)
MC is dedicated to improve the reshuffle, polished parts and the accuracy of the information depends on the shape of any helpful. Holders of the cutting tool is mounted is Mainstream, a flat mirror finish on the easy side table. Is still low in the overseas PUROGUMU machining center dedicated to the polished, is pretty out there.
Please ask for documents that will shape processing. (Modification of the MC and NC-controlled milling machine is a wish-FANUC)
One Response to "mirror sample processing screw"
Comment on this article
☆ Please!, To comment on this article, not a name or a nickname, such as company name, please.
October 29th, 2008 at 4:15 PM
Sasaki of the October 24, 2006.
Introducing the MATOMARIMASHITA processing company said.
Hurry up, and thank you to contact us.