3D-CAD TECNICO

Using the two conical extruder gear shaft, the tapered shape of the gear and you can not噛合design in 3D cad

The reference image is a tapered screw the same direction, with the clearance of 0.3mm噛合clearance is not a problem, especially if you think about the precision of 0.05mm or more three-dimensional modeling is necessary to pay attention cad .

I do not like the image TEPASUKURYU help push along the path and SUIPU Helical? Space plane with axes and (model) is required to define the settings. I can not imagine the shape and have not set a TEPARIDO.

If the gear is tapered processing data processing and modeling of the CAM machining path to the broth. And is accurate and reliable delivery method.

The three-dimensional shapes and Stacked cad from the center section features a way to twist the look is the way in its own way, you must be careful because the shower does not have accuracy and can interfere.

Sketches (2d section) → helical (spiral) → axis and space in front of the surface and sweep the steps extrusion (models), how to define the settings for your cad We support manufacturers.

A regular MC in the simultaneous 4-axis machining or 5-axis is the path of the shaft, screw machining A standard two-axis + X-axis simultaneous shower does not have to pass is the ideal companion on a shaft .

↑ CAD CAM at the direction of the 3D models in the processing option to specify the edge in terms of Y is an error or even to set a fixed axis. (For details, please support the maker CAM)

A axis + X axis, two simultaneous pressure on the path of screw shaft

Engineering is a method of 3D MODERINKU when 2D profile

In a 0.1m Make it a point to m intervals.

In this 3D (overhead) and the right image

. 0.1mm-spaced lines in the CAM

Y will edge out the path to a fixed axis

WOMASU.

In the machining process is 0.3mm

仕上GARIMASU in the clean surface.

What is good about this, but I'm not testing

Please see it.

CAM-axis control is easier to ask the manufacturers to customize 3DCAD CAM data can be edited with no side. Contact is expected to ask for an extension because it is the manufacturer of the program?