3D-CAD TECNICO

MC in the A-axis machining is usually a 4-axis simultaneous 5-axis is the path of the standard screw machining of the A-axis simultaneous two-axis + X axis is the ideal companion to the path that does not feel .

↑ CAD and CAM in the processing of the 3D models in order to specify the surface or edges in the Y axis of options and fixed the error of the set. (For more information, please CAM support for manufacturers.)

A-axis + X-axis, in the path of two-axis Screw Simultaneous Canada

How to work at the time of the 2D cross-section of 3D shapes MODERINKU

In the shape of 0.1m m Keep score in the interval.

In this state, 3D (three-dimensional), to the right image

. CAM 0.1mm spacing on the line

Y-axis to the edge of the path to a fixed expense

WOMASU.

0.3mm in the processing of the machining center.

In the clearer the finished surface.

This is a good way, I do not know the test

Please watch it.

CAM asked manufacturers to customize the control of axis 3DCAD data to be easily edited in the CAM will be without. To request an extension of the program, so we will contact the manufacturer to expect, then?

Information about the twin extruder (e-mail is what we are not open to the public)

The rotation is a complete screw-type噛合, Wapping and a better self-cleaning NIDINGU from Article 2 of the screw in a combination of kneading can be adjusted.

Contact with the contents of the two-point verification is required.

The main difference barrels (steps) to verify the absence of the outside diameter barrel bore diameter of the screw and clearance, please check the dimensions. (Screw is important for the shape of a cross-section later)