3D-CAD TECNICO

November 14

3DCAD create a Web 2.0 Logo

WordPress created in the CAD-style logo is Web2.0.

DXF and converted to images from 2d to 3d is the

Logo design techniques, such as Photoshop or CAD lllustrator

The ability to paint or if there Rendered in a series of five minutes of work

If the completion of the logo.

3DCAD is superior in the design depends on the function of the CAD

Corrected by experience that's easy to change shape and color accuracy tree

While work is recognized.

Sample images are on the front side, and give bumps 3d

The model can be represented. (This is no time here)

Parts of 3D CAD rendering feature set of materials are used in the picture.

Logo and 3D modeling and rendering of texture features at no time in a free CAD software

There are so, CAD, please use in combination with a sense of change and the use of CAD.

November 03

20mm2 extruder axis, the direction of rotation of the multistage tandem HAITORUKU specifications and formula (standard equipment), compare gear box

(Image: pink front HAITORUKUTAIPU)

Department Thrust, the standard method SURASUTOBEARINGU multistage tandem type of aircraft compared with body size gear case

1 / 2 below.

Refer to Diagram multistage can be seen in the output shaft gear attached to SURASUTOBEARIN alternately.

Is, of course, between the two axes of the shaft so limited in size and gear shaft bearings in each is limited.

Small two-axis rotational direction of extrusion HAITORUKU the low-speed gear box of high turnover and a strong torque

TASHIMASU.

Since there are no gear shaft, helical gears SUPAGIA items from the standard to move to the back of the device to change

Last inner diameter of the structure and the outside diameter of the tapered shape of the taper and repulsion using食込MI

Structure.

Tip of the screw into the inside of the coupling strength and lose FURE.

If a barrel mounted on the console, the lower tip of φ20mm × 3 to place a line installed in the shaft positioning

. Standard equipment of the barrel between the spacer and gearbox and mounted in the positioning, but

HAITORUKU specifications of the space is about 50mm.

100 (W) × 270 (D) × 150 (H) Overall length from the tip of the input shaft attached to the shaft tip.